Invacare Wheelchair Pronto M61, User Manual

Page: 17 / 68

Safety
Important information regarding speed reduction
with raised lifter
–
If the lifter has been raised above a certain point, the
drive electronics considerably reduces the speed of
the wheelchair. If speed reduction has been activated,
drive mode can only be used to carry out minor
movements of the wheelchair and not for regular
driving. To drive normally, please lower the lifter until
the speed reduction has been deactivated again.
2.8 The position of the labels on the product
A This label indicates that your
mobility device is a class A
product and may not be used
as a vehicle seat.
For details see below.
B This label indicates that
you must not turn the seat
through 360° to avoid that
the remote connection cable
winds up around the seat post
and breaks.
For details see below.
C
Identification of the position
of the coupling lever for
driving and push operation.
For details see below.
D Identification label sticker on
the rear post containing the
following symbols.
For details see below.
E Battery wiring label under the
top cover.
For technicians only.
Explanation of symbols on labels
Warning that the mobility device may not be used as
a vehicle seat.
This mobility device does not satisfy the
requirements of ISO 7176–19.
The mobility device is a class A product. It is
intended mainly for internal use and not necessarily
capable of negotiating outdoor obstacles.
1590425-A 17