SECTION 7—FRONT RIGGINGS
Power Tiger™
56
Part No 1134839
Articulating Footplates
1. Remove the two mounting screws that secure the heel loop to the articulating
footplate.
2. Replace heel strap/loop.
3. Reverse STEP 1 to reassemble.
NOTE: When securing heel loop to the footrest assembly, tighten mounting screw until the spacer
is secure.
Adjustable Footplate
NOTE: For this procedure, refer to FIGURE 7.5.
1. Remove the four mounting screws and washers that secure the existing heel loop to
the footplate.
2. Position the mounting holes of the new heel loop with the mounting holes in the
adjustable footplate.
3. Secure the new heel loop to the footplate with the four mounting screws and washers.
Securely tighten.
FIGURE 7.5
Replacing Heel Loops
Mounting Screw
Spacer
Locknut
Composite Footplate
Composite Footplate
Articulating
Footplate
Heel Loop
Mounting
Screw
Mounting Screw and Coved Washer
Articulating Footplate
Mounting Screws
Mounting Screws
Washers
Adjustable Footplate
Heel Loop
Heel Loop
