Invacare Power Tiger Owner'S Operator And Maintenance Manual Download Page 51

Page: 51 / 88

SECTION 6—WHEELCHAIR OPERATION

Part No 1134839

Power Tiger™

Repositioning the Joystick

NOTE: For this procedure, refer to FIGURE 6.22.

1. Turn the adjustment lock lever to

release the joystick mounting tube from

the mounting bracket.

2. Remove the joystick from the wheelchair.
3. Remove the three hex screws that

secure both halves of the mounting

bracket to the arm tube.

4. Reposition mounting bracket on

opposite arm tube ensuring the

threaded plate of the mounting bracket

is on the inside of the arm tube as

shown in FIGURE 6.22.

FIGURE 6.22

Repositioning the Joystick

5. Using the three hex mounting screws and washers, secure both halves of the mounting

bracket to the arm tube.

6. Slide the joystick mounting tube through the mounting bracket to the desired position.
7. Turn the adjustment lock lever to secure the joystick mounting tube into the mounting

bracket.

Washers

Hex

Mounting

Screws

Mounting

Bracket

Adjustment

Lock Lever

Joystick

Mounting

Tube

Mounting Bracket

(Threaded Plate)

Arm

Tube

NOTE:

Joystick

not

shown.

Summary of Contents for Power Tiger

























































































Search results

Summary of Contents for Power Tiger

Reviews:

Related manuals for Power Tiger

Brands by name

Popular brands

Invacare Power Tiger, Owner'S Operator And Maintenance Manual

Search results

Summary of Contents for Power Tiger

Reviews:

Related manuals for Power Tiger

Brands by name

Popular brands