SECTION 8—ARMS
Part No 1134839
63
Power Tiger™
Adjusting T-Arm Transfer Assists and/or Side Guards
NOTE: For this procedure, refer to FIGURE 8.4.
1. Remove the T-arm from the wheelchair. Refer to Installing/Removing T-Arms on
page 38.
2. Remove the two socket screws that secure the side guard to the bottom clamp.
NOTE: Adjusting the side guards will directly affect the position of the transfer assist.
3. Perform one of the following:
• Small Side Guards - Move the bottom clamp up one of two mounting positions in
the side guard.
• Large Side Guards - Move the bottom clamp up one of three mounting positions
in the side guard.
4. Re-secure the side guard to the bottom clamp with the two socket screws. Torque to
80-90 in-lbs.
5. Install the T-arm onto the wheelchair. Refer to Installing/Removing T-Arms on
page 38.
FIGURE 8.4
Adjusting T-Arm Transfer Assists and/or Side Guards
Transfer Assist
Slide Guard
T-Arm
Socket Screws
Bottom Clamp