7.34.1
Removing/Installing the Rear Shroud
Reverse this procedure to install the rear shroud.
1.
Remove the three pan head screws
A
that secure the rear
shroud
B
to the base frame
C
.
2.
Remove the rear shroud from the base frame.
7.34.2
Removing/Installing the Front Shroud and
Battery Retention Bracket
Reverse this procedure to install the front shroud and
battery retention bracket.
The front shroud
D
and battery retention bracket
E
are
removed from and installed onto the wheelchair frame as
a single unit.
1.
Remove the two socket head screws
F
securing the front
shroud/battery retention bracket to the base frame
C
.
2.
Lift up to unhook the battery retention bracket from the base
frame and remove the front shroud/battery retention bracket
from the base frame.
7.34.3
Removing/Installing the Top Shroud
Reverse this procedure to install the top shroud.
1.
Remove the seat from the base frame.
2.
Remove the four pan head screws
G
securing the top shroud
H
to the base frame
C
.
3.
Lifting up, remove the top shroud from the base frame.
7.35
Connecting/Disconnecting Battery Wiring
Harness - TDX SP with Elevating Seat Only
FOR FRONT BATTERY
FOR REAR BATTERY
1143155-R-01
79
Summary of Contents for Formula CG Elevate
Page 95: ...Notes...
