7.23
Adjusting the Tension of the Flip Up
Footplate
The tension can be adjusted to increase or decrease the
rotation effort of the flip up footplates
A
.
1.
Loosen the mounting screw
B
on the front rigging angle hinge to
decrease the rotation effort.
DO NOT remove the footplate mounting screw.
2.
Tighten the front rigging angle hinge mounting screw to increase
the rotation effort.
3.
Repeat STEPS 1 and 2 for the other footplate.
7.24
Adjusting the Back Angle
1.
Loosen, but DO NOT remove, the two lower hex screws
A
securing the cane brackets
B
to the back canes
C
.
2.
Remove the two upper hex screws
D
, washers
E
and locknuts
F
securing the cane brackets to the back canes.
3.
Align the upper mounting holes in the back canes with the
desired mounting holes in the cane brackets.
4.
Install the two upper hex screws, washers and locknuts to secure
the cane brackets to the back canes.
5.
Torque the locknuts to 13 ft-lbs.
1143155-R-01
67
Summary of Contents for Formula CG Elevate
Page 95: ...Notes...
