WARNING!
Risk of Serious Injury or Damage
Operating the wheelchair with a ground clearance of
less than 75 mm (3 inches) between the footplates and
the ground/floor may cause serious injury or property
damage.
–
ALWAYS maintain a minimum of 75 mm (3
inches) between the bottom of the footplates and
ground/floor to ensure proper ground clearance while
the wheelchair is in motion. If necessary, adjust the
footplates height to achieve proper ground clearance.
After footplates height adjustment, if the wheelchair
dips forward and the footplates touch the ground
while in motion, please contact your dealer for an
inspection and avoid use of the wheelchair if possible.
1.
Engage the release lever with one hand (not shown) and move
the center mount footrest
A
to the desired angle with the other
hand.
2.
Disengage the release lever (not shown) to lock the center
mount footrest in the new position.
7.21
Adjusting the Footplate Width of the
Center Mount Footrest
Narrow configuration shown (No Spacers)
1.
Flip footplate
A
down
2.
Remove the mounting screw
B
, nylon washer
C
, washer
D
and
wave washer
E
securing the footplate to the extension tube
F
of the center mount footrest
G
.
3.
Reposition the four 1/4 inch spacers
H
between the footplate
and washer as necessary to achieve the desired footplate width
4.
Using the mounting screw, nylon washer, washer and wave
washer, secure the footplate to the extension tube.
5.
Repeat STEPS 1 and 4 for the other footplate.
1143155-R-01
65
Summary of Contents for Formula CG Elevate
Page 95: ...Notes...
