SECTION 7—BACK
Part No 1127114
75
Compass™XE
and Allegro®
2 or 3-Inch Seat Cushion (Recliners Only)
NOTE:
For
this
procedure,
refer
to
FIGURE 7.12.
1. Remove
the
rear
wheels
from
the
wheelchair.
Refer
to
Removing/Installing
Rear
Wheels
on
page 101.
2. Remove
the
hex
bolts,
spacers,
washers
and
locknuts
that
secure
the
recliner
brackets
to
the
wheelchair
frame.
3. Refer
to
FIGURE 7.12
to
determine
the
recliner
bracket
mounting
position
for
the
corresponding
seat
cushion
height.
4. Position
the
recliner
brackets
on
the
wheelchair
frame
at
the
position
determined
in
STEP
3.
5. Reinstall
the
hex
bolts,
spacers,
washers
and
locknuts
through
the
recliner
brackets
and
wheelchair
frame
and
tighten
securely.
Refer
to
FIGURE 7.12
for
correct
hardware
orientation.
6. Reinstall
the
rear
wheels
onto
the
wheelchair.
Refer
to
Removing/Installing
Rear
Wheels
on
page 101.
FIGURE 7.12
Repositioning the Back- 2 or 3-inch seat cushion (recliners only)
2-inch Seat Cushion
Position
3-inch Seat
Cushion Position
Uni-Washer
Hex Bolts
Locknuts
Washers
Wheelchair Frame
Coved Spacer
Recliner Brackets