SECTION 11—RECLINER
Compass™XE
and Allegro®
114
Part No 1127114
SECTION 11—RECLINER
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may occur.
The seat height, seat depth, back angle, seating system, size/position of the rear
wheels, size/position of the front casters, as well as the user condition directly relate
to the stability of the wheelchair. Any change to one or any combination of the nine
may cause the wheelchair to decrease in stability. These adjustments MUST be per-
formed by an authorized dealer or qualified technician.
NOTE:
Refer
to
the
section
indicated
if
any
of
the
following
procedures
are
required.
REPLACEMENT/ADJUSTMENT
LOCATION IN MANUAL:
Folding/Unfolding the Wheelchair
Safety/Handling of Wheelchairs on page 20.
Replacing Back/Headrest Upholstery
back on page 63.
Adjusting the Back Height
Adjusting Back Height on page 67.
Repositioning the Back (Changing Seat Depth)
Repositioning the Back (Changing Seat Depth)
on page 73.
Repositioning Back For 2 or 3-inch Seat Cushion
2 or 3-Inch Seat Cushion (Recliners Only) on
page 75.
Replacing Folding Push Handle
Replacing Folding Push Handle - Recliners Only
on page 76.
Replacing the Seat Upholstery
Replacing Seat Upholstery on page 78.
Changing/Repositioning Seat Rails
Changing/Repositioning Seat Rails on page 78.
Repositioning the Crossbraces
Repositioning the Crossbraces on page 79.
Changing Seat Width
Changing Seat Width on page 80.
