IntesisBox
®
PA-AC-ENO-1i / 1iC
User’s Manual r1 eng
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SL
URL
Email
tel
http://www.intesis.com
[email protected]
+34 938047134
13 / 43
S1: AC switches
- 1
S1-1
- 2
S1-2
- 3
S1-3
- 4
S1-4
S2: Profile selector
S3: Push button
S4: EnOcean switches
- 1
S4-1
- 2
S4-2
- 3
S4-3
- 4
S4-4
K1: AC connector
K2: Inputs connector
K9: Bootloader connector
L1: EnOcean LED
L2: AC LED
4. Manual configuration
4.1 Configuration
The IntesisBox
®
(Figure 4.1) has two sets of switches, a push button and a rotary profile
selector in order to configure the behaviour of the device and perform EnOcean actions
(explained in Table 4.1, Table 4.2 and following sections).
Figure 4.1
IntesisBox
®
diagram
S1
– AC unit configuration: fan mode
Binary
value
b
0
…b
3
Decimal
value
Switches
1 2 3 4
Description
xxx0
0
x x x
Indoor unit has no fan mode (default value).
xxx1
1
x x x
Indoor unit has fan mode.
Table 4.1
S1 switch configuration
