InterTest, Inc. • 908-496-8008
MZ-5™ FS Inspection System
EM15201 Rev A
Page
35
Version 1.0 • Nov 2020
Chapter 4 —
Specifications
Detailed System Specifications
Introduction:
The MZ-5 FS performs visual examinations of bore ID. It provides white and UV illumination while viewing the
surfaces with live HD video or capture of 13 megapixel photos. The MZ-5 FS builds on the successful MZ-5 HD
matched to display and capture hardware.
Gun Tube Application:
MZ-5 FS supports the visual examination of 105, 120, and 155 mm up to 8” gun tube bores on the MPI bench
during the MT process and is suitable for field use. Tubes are rotated in place on the MPI bench. Tube lengths
up to 40’ may be inspected. The head contains two cameras that can be switched between wide field HD down
tube view and HD right angle view. Both cameras can operate in HD video or 13 MP still capture modes.
Specifications:
1. Video performance
a. HD video for inspection of MPI at 1080p/30 and 1600 x 1200 side and down tube views
b. Sensor optimized for white and UV examinations
c. 13 MP (4192 x 3104 pixels, 4K type) still image capture down tube and side views
d. 90º DOV side view
i. Wide field right angle 53º HFOV
1. 2.1” x 1.2” for 105 mm tube
2. 2.4” x 1.3” for 120 mm tube
3. 3.0” x 1.6” for 155 mm tube
ii. Remote focus in either auto or manual modes
e. 0º DOV down tube view
i. 132º x 108º (H X V)
ii. 1600 x 1200 pixels
f. Optical and camera components protected from process fluids
2. Mechanical head and pole
a. 2.25” diameter (permits use of M-3 borescope centering hardware)
b. 28’ base system length (built up from 45” segments)
c. 40’ max system length achieved by the addition of 45” extension sections
d. 8 each quick on-off centering fixtures for 105, 120, 155 mm tubes
e. Extension poles marked for down tube insertion position 1” increments with call outs
f. Tube rotation based on MPI bench motorized hardware or manual pole rotation
3. Illumination – High performance UV and White LEDs rated 10,000 hour life.
a. UV is 365nm at intensity > 2000 µW/cm
2
on the target surface with < 2 fc white content
b. Down bore view – 365 nm UV LEDs 4 units
c. Down bore view - White LEDs 4 units
d. Side view – 365 nm UV LEDs 4 units
e. Side view - White LEDs 4 units
f. Side view independent fore and aft intensity control both white and UV
