InterTest, Inc. • 908-496-8008
MZ-5™ FS Inspection System
EM15201 Rev A
Page
7
Version 1.0 • Nov 2020
DANGER
Indicates the presence of an extreme hazard that will probably cause death or
severe personal injury. Hazards of this kind MUST be avoided at all cost.
WARNING Indicates the presence of a hazard that
could
cause death or severe personal
injury. Hazards of this kind MUST be avoided at all cost.
CAUTION Indicates the presence of a hazardous condition that can or will cause minor
personal injury or property damage if the hazard is not avoided. The Caution
Indication is also used for property-damage-only accidents. The Caution Indicator
may be used to warn against potential equipment damage and possible service
interruption.
Safety Considerations
Preface
This manual describes this equipment, its functions, and its use. It also describes the precautions to be taken to
ensure safe operation. Please read this manual thoroughly before attempting to operate the equipment. By doing
so, you will familiarize yourself with the equipment’s capabilities and understand its functions. After you finish
reading this manual, store it in an accessible location for future reference.
Carefully follow all warnings and instructions included in this manual and marked on the equipment.
Operational, General Safety Considerations and Precautions
Always observe the guidelines and precautions that follow.
DANGER, Risk of Electric Shock: Unplug the power cord from the wall receptacle when advised to
do so in a procedure. Be advised that the equipment must be turned off when service work is
required.
Never remove the top cover of the controller. Electrical shock hazards exist due to high internal
voltage. There are no user-serviceable parts inside the controller, except for fuses, which are
accessible via the rear panel. Refer all service to the InterTest Customer Service and Support
Group.
IMPORTANT: To ensure operator safety, read and understand this manual before using the
system. Using any piece of this equipment in a manner not specified by the manufacturer does
not protect the user from harm.
In addition, accessories listed in this manual are the only accessories considered suitable for use
with this system. Accuracy of the rotary encoder is compromised when the probe is operated at
steep angles.
To avoid injury, read and understand the associated documentation for MZ-5™ FS Inspection
System component prior to attempting operation. Direct any questions about equipment operation
to the InterTest Customer Service and Support Group at 908-496-8008 or via email to
[email protected].
DANGER, Explosion Hazard: Do not use this system in explosive environments. The controller
requires adequate ventilation to prevent overheating. Do not cover or drape the controller. To
ensure adequate airflow, provide a three-inch (7.6 cm) clearance between the controller chassis
vents and any solid objects.
IMPORTANT If LED’s need servicing. Contact InterTest
IMPORTANT: Proper use of this product requires a protective earth ground path at the AC power
source. Using a two-conductor extension cord or any other device that compromises this ground
path is in violation of safe operating guidelines.
