www.intertec.info
Operating Instructions SL MINITHERM DNLA
Page 6 / 8
HOM177850763Ien-7
INTERTEC-Hess GmbH · Raffineriestr. 8 · 93333 Neustadt/Donau · Germany ·
+49 9445 9532-0 · [email protected]
CAUTION
NOTICE: Do not remove adapter/ cable
connection to connect up the heater!
This would cause irreversible damage to the heater.
The illustration may deviate from the heater.
1
2
L
N
PE
J
J
Junction
box
Heater
TAE
bn
bl
ye/gn
bk
gy
Option AM
bn=brown bl=blue ye/gn=yellow/green bk=black gy=grey
Illustration 5:
SL...THERM with TAE
1
2
J
L
N
PE
J
Junction box
Heater
TS
Option AM
bn
bu
ye/gn
bk
gy
bn=brown bu=blue ye/gn=yellow/green bk=black gy=grey
Illustration 6:
SL...THERM with TS
9
Commissioning
If the heater is installed in accordance with the notes in
the
Page 5]
sections,
then
the
radiator
may
be
commissioned.
CAUTION
Sufficient heat dissipation must be ensured.
Unauthorized covers must be removed as otherwise
there is the risk of the heater overheating.
The heating circuit is permanently disconnected by a
temperature melt fuse which can't be reset if these
installation instructions are not adhered to.
10
Maintenance
The design of the device does not require any
maintenance.
