Connecting the octopus breathing hose and valve
1.
Connect the hose to the octopus breathing valve by screwing it on finger
tight. Close the lever on the octopus breathing valve.
2.
Make sure the hose is held in place and that there are no protruding parts
that can get stuck.
Connecting the Divator DP1 hose
1.
Attach the P+ regulator with its P+ holder to the waist belt on the Divator
Pro harness by fitting the bungee cord around the waist belt.
2.
Connect the carabiner to the Divator Pro harness on its attachment point
on the right shoulder strap.
Make sure that no pull force in the DP1 hose will pull directly on the P+
regulator.
3.
Connect the hose with underwater quick coupling from the Divator Pro P+
to the DP1 connection on the reserve valve.
Notice
With the lifeline correctly connected, it is possible to pull the
supply hose in any direction without straining the connection.
All strain must be absorbed by the relieving loop and the
carabiner.
Divator Pro
15
ENGLISH