Version 2.0 (12/2019) Online
Translation of the original operating manual
25 von 38
Assembly and installation
5
Assembly and installation
5.1
Warning notices for installation
NOTE
An improper approach to installing the AdControl can lead to material damage or reduce the service life of the
AdControl.
¾
To preserve the interior of the AdControl, do not allow the AdControl to fall or for it to be used in an
improper fashion.
¾
Check each AdControl before assembly for any visible damage.
¾
Ensure that the AdControl is not tensioned during the assembly process (no bending or torsional load).
¾
Do not drill any additional mount holes into the housing and do not enlarge any existing holes.
¾
Ensure that the permitted operating temperature is under no circumstances exceeded as a result of external
heat sources.
5.2
Assembling the AdControl
¾
Look for level surfaces that are suitable for mounting the AdControl on.
¾
Use the AdControl as a template and mark the middle of the two installation holes. For the distance between
the installation holes, see „Dimensions“ on page 18.
¾
Drill two installation holes with diameters of 5.6–6 mm on the markings.
¾
Screw on the AdControl.
¾
Make sure the housing has not been distorted.
