8 von 38
Version 2.0 (12/2019) Online
Translation of the original operating manual
Safety-related information
2
Safety-related information
2.1
State of the art
The Interroll AdControl has been constructed with respect to applicable standards and the current state of the art and
has been delivered in a condition that is safe to operate. Nevertheless, hazards can occur as a result of use.
Non-compliance with the instructions in this operating manual can result in life-threatening injuries.
In addition, the applicable local accident prevention regulations for the area of application and general safety
regulations must be adhered to.
2.2
Proper use
The AdControl may only be used in an industrial environment for industrial purposes within the stipulated performance
limits that are given in the technical specifications.
The AdControl may only be used in an industrial environment for industrial purposes within the defined performance
limits specified in the technical data.
The AdControl can be used if a RollerDrive EC300 (predecessor of the EC310) is to be replaced by a RollerDrive
EC310. The AdControl has a short connection cable with plug. The plug corresponds to that of the EC300 and is
connected to the existing DriveControl EC200/EC300 or extension cable.
By using AdControl a RollerDrive EC310 can be used without changing the existing wiring.
Depending on the gear ratio, the AdControl can also be used when replacing an EC200 with an EC310.
2.3
Improper use
Any use that goes beyond the proper use is considered improper, unless this has been authorised by Interroll
Engineering GmbH where applicable.
The equipment must not be installed in areas in which substances could form explosive atmospheres/dust atmospheres
or for application in the medical/pharmaceutical sector.
It is considered improper use to install the equipment in exposed spaces that are open to potentially adverse weather
conditions, or areas in which the technology would suffer from the prevailing climactic conditions and could potentially
malfunction as a result.
The AdControl is not intended for use by private end users. The equipment must not be used in a residential
environment without further examination and without the use of EMC protective measures that have been adapted
accordingly.
It must not be used as a safety-relevant component or for performing safety-relevant functions.
