InterPuls PORTABLE IMILK401 Instruction Manual, Operation And Maintenance Original Instructions Download Page 17 | Manualshive

Page: 17 / 62

InterPuls PORTABLE IMILK401 Instruction Manual, Operation And Maintenance Original Instructions Download Page 17

PORTABLE IMILK401

-

Instruction Manual, Operation and

Maintenance original instructions

5640015_07.17_EN

THIS MANUAL IS THE PROPERTY OF -

InterPuls

S.p.A.

-

ANY COPYING, EVEN PARTIAL, IS STRICTLY PROHIBITED

MI - 17

6 FIRST USE OF THE MACHINE

6.1 General description

Before using the machine, you need to make some pneumatic and electrical connections and know the
correct uses of the Portable iMilk401.
This paragraph illustrates:

1. how to insert the tube retaining rings
2. how to carry out pneumatic connection between the Portable iMilk401 and the Combifast mobile

part

3.  how to carry out pneumatic connection between the Portable iMilk401 and the milking clusters
4.  the pneumatic connection diagram
5.  the iMilk401 panel connection diagram

WARNING

Do not connect power supply before all cabling has been completed and the iMilk401 box has
been closed correctly.

Do not connect anything when the Portable iMilk401 is connected to the network.

NOTE

This manual only shows how to connect the Combifast mobile part to the iMilk401 and how to
make the electrical connection. For details on assembling the Combifast, refer to the specific
product manual.

NOTE

This manual shows how to connect the milking cluster correctly to the iMilk401. The
procedure for milking cluster assembly is left to the system engineer as it is not covered by
this manual.

«
...
15
16
17
18
19
...
»

Summary of Contents for PORTABLE IMILK401































































Reviews:

No comments