manualshive.com logo in svg

Interphase iSPAN, User Manual

Share
Download
Interphase iSPAN User Manual Download Page 94

Viewing Logical Adapter Connection Status

74

Interphase Corporation

Viewing Logical Adapter Connection 
Status

To view the logical adapter connection status:

1.

If needed, start the NDIS driver Setup utility, as 
described in 

Starting the NDIS Driver Setup Utility

 on 

page 64

.

2.

In the Adapter section of the NDIS Driver Setup dialog 
box, click the 

Status 

button.

The Status dialog box appears for the displayed logical 
adapter.

Figure 5-5.  NDIS Logical Adapter Status

For all channels associated with the logical adapter, this dialog 
box displays the total numbers of frames transmitted and 
received successfully and with errors. The transmit and receive 
counters are dynamically refreshed every second. Use this 
information to detect an abnormal rate of communication 
errors. 

Summary of Contents for iSPAN













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands