Interphase iSPAN, User Manual

Page: 155 / 236

Chapter 8: Setting up SNA Server Link Services
iSPAN Serial WAN Adapter Users Guide
135
4. To configure the Serial line properties for the SDLC
link service, do the following:
a. In the Port section, click the Port Settings button.
The Serial Line Properties dialog box appears.
Figure 8-7. Serial Line Properties Dialog Box
b. Select the correct Clock value for this service, if
needed. For other properties, accept the default
values.
c. Click OK to save the serial line properties and return
to the SDLC Link Service Properties Card
Configuration dialog box.
5. Click OK to save the link service configuration.
– If you edited the SDLC link service, the SNA Server
Manager reappears.
– If you inserted the SDLC link service, the Insert
Link Service dialog box reappears.
6. If you inserted the SDLC link service, continue as
follows:
– If you need to insert another Interphase link service,
on the Insert Link Service dialog box, select the
service and click
Add . Then complete setup steps for