Interphase iSPAN, User Manual

Page: 107 / 236

Chapter 5: Setting Up the NDIS Driver
iSPAN Serial WAN Adapter Users Guide
87
PPP Serial Port Properties
The following illustration shows the Port section of the
Channel properties dialog box when the PPP WAN protocol is
selected.
Figure 5-15. PPP Channel Port Properties
To set up port properties for a channel using the PPP protocol,
do the following:
1. In the Card field, if more than one physical
i SPAN
-
Serial WAN adapter is installed, select the physical
adapter to be used by the channel.
2. To specify serial port properties for the selected adapter,
do the following:
a. Click the Properties button in the Port section of the
Channel properties dialog box.
The Serial Line Properties dialog box appears.
Figure 5-16. Serial Line Properties