Interphase iSPAN, User Manual

Page: 103 / 236

Chapter 5: Setting Up the NDIS Driver
iSPAN Serial WAN Adapter Users Guide
83
Next, if you want to set up PPP port properties, skip to Setting
Up Port Properties on page 86 .
X.25 WAN Properties
The X.25 Properties dialog box enables you set up WAN
properties for a channel that uses the X.25 protocol. Use this
dialog box to define the properties of outgoing calls and
choose how to filter incoming calls.
Figure 5-13. X.25 Properties
For detailed information about setting up protocol parameters
using this dialog box, see online help.
To set up X.25 WAN properties for the channel, do the
following:
1. In the Outgoing call section, set up properties for
outgoing calls as follows:
a. In the Remote address field, to route the outgoing
call to the remote peer, enter the address of the
remote peer. You can add a one or two-digit sub-
address to connect to a specific workstation or
application on a LAN.
b. In the Local sub-address field, if you want the
network to provide the local sub-address to the