Interphase 50-200, User Manual

Page: 31 / 35

33 User Manual
6
. Frequently Asked Questions
6.1 How can I disconnect the cables from the 50-200 FISH
FINDER in case I need to do so for the installation?
♦
Open the 50-200 FISH FINDER box unscrewing the four screws (see
the following figure).
Fig. 6.1 - The 50-200 FISH FINDER (I)
♦
Once the screws are removed, pull out the panel and the Printed Circuit
Board (PCB). Unscrew the cables from the PCB.
Fig. 6.1a - The 50-200 FISH FINDER (II)
♦
Wire the cables as needed.
♦
Reconnect the cables to the PCB (see the Fig. 4.5 for reference).
♦
Push the panel towards the case (be sure to have well positioned the
rubber gasket). Close the 50-200 FISH FINDER box screwing the four
screws.