![background image](http://html1.mh-extra.com/html/international-thermal-research/the-waterheater/the-waterheater_installation-and-operating-manual_2080025053.webp)
Section 9, Mounting the Space Heating Module (optional)
Make sure you are familiar with the Section 1, Overview of this
Manual. If the system is not installed according to specifications
and with the correct equipment, your Space Heating Module may
not operate properly, safety may be compromised, and your
warranty may be voided.
!
WARNING
9.2 Identifying Your Space Heating
Module Model
As the owner, you must be fully aware of the controls and
operating features particular to your model of the Space Heating
Module. This is essential for the proper functioning and life of your
Space Heating Module as well as protecting your warranty. Your
model can be identified by locating the serial number label on the
outside case of the Space Heating Module. The serial number
identifies the model type through the first series of letters and
numbers.
The type of Space Heating Module model is:
SHM – Space Heating Module
9.3 Your Mounting Location
Your mounting location should consider the following:
•
Mounting location must be able to support 50 pounds (23 KG).
•
The module must be mounted in an area that provides
unrestricted access to the front panel water and coolant
connections (minimum of 6” top clearance for the side
expansion tank) with 3” clearance to all other module surfaces.
•
Module is 11”H x 12”W x 6.5” D (27.9 cm x 30.5 cm x 16.5 cm).
•
Module must be mounted vertically and level using four, 1/4”
through bolts using 1” diameter fender washers, lock washers
and nuts.
Space Heating Module must not be installed in any compartment
with flammable gases.
! CAUTION
•
Space Heating Module must be mounted in an area that
provides unrestricted access to the front panel mounted coolant
9-2
The WaterHeater™ by ITR