Section 8, Operating the WaterHeater
8-4
The WaterHeater™ by ITR
Burner Switch (Primary Heat Source)
•
The burner switch controls the ON/OFF of the diesel burner.
The Burner LED will turn ON when the diesel burner has been
activated.
Burner LED (Green)
•
When ON, indicates the diesel burner has been activated.
AC Heat LED (Green)
•
When ON, indicates the 120 VAC immersion element has
been activated.
Service LED (Red)
•
When ON, indicates The WaterHeater™ by ITR has faulted.
The specific fault can be identified by examining the
WaterHeater™ Control Panel located on the WaterHeater™.
There are three red and six green indicator LED’s on this
panel. Refer to the description of the WaterHeater™ Control
Panel for further details.
8.6 Functions of The WaterHeater™ by ITR
Control Panel
The WaterHeater™ by ITR’s Control Panel, Figure 8-3:
WaterHeater™ Control Panel, contains three push buttons: ON/OFF
power, Bypass and Reset. In addition, it contains nine LED’s
indicating Power, AC Heat, Air Compressor, Fuel Pump, Combustion
Fan, Igniter, Flame Fault, Voltage Fault and Low Water Level Fault.
