Section 9, Mounting the Space Heating Module (optional)
9.8 What NOT to Do
•
Don’t over tighten the mounting lock nuts.
9.9 Procedure
After choosing the mounting location for the Space Heating
Module:
1
Mount the Space Heating Module vertically and level.
2
Secure the Space Heating Module in place (against the wall,
floor, or a mounting platform) using four(4) x 1/4” through
bolts and 1” diameter fender washers, lock washers and nuts .
9.10 INSPECTION AND TESTING
After all components have been properly installed according to
ABYC Industry Standards and Practices and the recommendations
of this Manual, the Space Heating Module and The WaterHeater™
by ITR should be inspected using the
Inspection Check Sheet
in
this Manual. The
Inspection Check Sheet
is divided into
relevant sections allowing each phase of the Inspection to be
carried out systematically, and then signed off by authorized
personnel.
9-10
The WaterHeater™ by ITR
