Intermec Trakker Antares 2430, User Manual

Page: 56 / 114

Chapter 2— Configuring the Terminal
nugget
39
42 Trakker Antares 243X Handheld Terminal User’s Manual
Save new
configuration
(in RAM)?
243XU052.eps
YES NO
CANCEL
2 Choose Yes and press the Enter key to save your changes in RAM and
update the current configuration on the terminal. The Main Menu
appears.
Or, choose No and press the Enter key to exit without changing the
configuration. The Main Menu appears.
Or choose Cancel and press the Enter key to return to the previous
menu or screen.
3
From the Main Menu press the Esc key. If you have made any changes,
the next screen prompts you to store the changes in flash memory.
Store configuration
changes in flash
memory?
(used when rebooting
the terminal)
243XU054.eps
YES NO
CANCEL
Note: You can also save the current configuration in flash memory by
choosing the Store Configuration command from the System Menu.
For help, see “Saving Configuration Changes in Flash Memory” in
Chapter 2 of the 2400 Family system manual.
4
Choose Yes and press the Enter key to save your changes in flash
memory. The terminal saves the current configuration as the active
configuration. The Exiting TRAKKER Antares 2400 Menu System
screen appears.
Or, choose No and press the Enter key to exit without saving. The
terminal continues to use your changes until you boot or reset the
terminal. The Exiting TRAKKER Antares 2400 Menu System screen
appears.