Intermec Trakker Antares 2430, User Manual

Page: 110 / 114

Index
96 Trakker Antares 243X Handheld Terminal User’s Manual
pin assignments
input device connector ( continued )
Symbol connector module, 89
Point-to-Point protocol, described, 53
Polling Mode D protocol, described, 54
Portuguese
diacritical marks, entering, 18
keypad, described, 12
POST
failed
error message, 64
status beeps, 24
success, status beeps, 24
postamble, ASCII control characters, entering, 40
power management
Battery status icon, 22
guidelines for, 11
preamble, ASCII control characters, entering, 40
problems, finding and solving, 64
protocol
Binary, described, 51
communications, described, 51
Configurable, described, 52
list of, 86
Master Polling, described, 53
Point-to-Point, described, 53
Polling Mode D, described, 54
RF
TCP/IP, described, 54 to 62, 55
UDP Plus, described, 54 to 62, 55
WTP, described, 54 to 62
protocol stack, checking the protocol loaded, 36
quiet zone, bar code labels, 26
R
radio
802.11b
access points, configuring, 57
specifications, 86
OpenAir
access points, configuring, 57
specifications, 86
troubleshooting, 72 to 74
RAM
described, 31
RAM Drive Size command, 43
saving configuration changes, 40
specifications, 86
reader commands, troubleshooting, 65, 67
resetting the terminal, 80
resume
booting the terminal, 78
described, 15
RF communications
radio specifications, 86
security, 802.1x,
See 802.1x security
site survey, planning, 55
status icons, using to monitor, 62
troubleshooting, 72 to 74
RF network
DCS 30X, configuring, 55
equipment required, 55
illustrated, 47
installing, overview, 54
Intermec Gateway, configuring, 55
protocol, checking the protocol loaded, 36
terminal, configuring, 58
RF port, 24
running applications, troubleshooting, 74
S
safety procedures, ix
saving configuration changes
exiting screens, 41
TRAKKER Antares 2400 Menu System, exiting, 40
Scan button, using, 25
scanner
commands, listed, 28
connecting to terminal, 28
troubleshooting, 76 to 78
See also input devices.
Scanner Selection command
serial connector module, configuring input
devices, 88
standard connector module, configuring input
devices, 87
screen
cleaning, 81
contrast, adjusting from the keypad, 20
specifications, 84
status icons
Battery, 22
Caps Lock, 22
enabling, 21
Modifier Key, 22
Network Connect, 22
Network Transmit, 22
User Defined, 22
security ID, troubleshooting, 66
security, 802.1x,
See 802.1x security
serial adapter cable, terminal accessory, 85
serial communications,
See serial port, communications
serial connector module
configuring
input devices, 88
Scanner Selection command, 88
described, 28
input device interface cable, 88
pin assignments, 89
serial port
communications
protocols, described, 51
troubleshooting, 66 to 70, 75
network, illustrated, 46
specifications, 86
using, 24
Shift key, using, 16
shipping box, contents, 7