12
Intermec EasyCoder 201 II – Technical Manual
Installation Check List
❑
Unpack the printer as described on next page.
❑
Standard EasyCoder printers
If you have a standard EasyCoder 201 IIS, EasyCoder 201 IIE,
or EasyCoder 201 IISA printer, go on to next step.
Customized EasyCoder printers
If you have a customized EasyCoder 201IIS, EasyCoder 201
IIE, or EasyCoder 201 IISA printer, check its CPU board and
possible optional interface board in regard of interface circuits
and straps as described in the chapters “Electronics” and
“Interfaces” at the end of this manual. Then go on to next step.
❑
Connect the printer to a mains socket as described later on in this
chapter.
❑
Connect the printer to its host computer by means of a suitable
communication cable, as described later in this chapter. (Refer
to the chapter “Interfaces” for more information on computer
connection and cable configurations). This step is not necessary
for EasyCoder 201 IISA.
❑
Load a supply of thermal paper, see the User's Manual.
❑
If you want to use a memory card, insert it into the optional
memory card adapter (see chapter “Memory Card Adapter”).
❑
Check that the printhead is lowered.
❑
If the printer is fitted with an optional paper cutter, check that the
cutter unit is locked in closed position.
❑
Turn on the power.
❑
Depending on the printer's software, proceed according to one
of the five alternatives described in the chapter “Starting Up”.
INSTALLATION