Intermec CS40 Vehicle Power Adapter, User Manual

Page: 66 / 152

Chapter 7 — Configuring the Computer
54 CS40 Mobile Computer User’s Manual
How to Configure the Computer
You can configure many parameters on the computer such as the bar
code symbologies it decodes or the network settings. The values you
set for these parameters determine how the computer operates.
There are several ways to configure the computer:
• Directly on the computer. You can use Intermec Settings directly
on the computer to change only the settings on that computer. For
more information, see
“Using Intermec Settings On the
Computer” on page 54 .
• Remotely using Intermec SmartSystems Foundation. When you
use SmartSystems, you can remotely configure all your CS40
mobile computers as well as other SmartSystems-enabled Intermec
computers and peripherals. For more information, see
“Using
Intermec Settings Remotely With SmartSystems Foundation”
on page 61
.
• You can use a third-party device management product that
supports the computer and Intermec Settings, such as Soti
MobiControl or Wavelink Avalanche. For more information, visit
the
Device Management page on the Intermec web site.
•
You can use imager configuration bar codes to enable or disable
symbologies, reset to factory defaults, and set predefined imager
modes. For more information, see
“Imager Configuration Bar
Codes” on page 125 .
You can also configure the computer with configuration bundles that
you create using SmartSystems Foundation. For more information,
see the SmartSystems Foundation Online Help.
Using Intermec Settings On the Computer
Use Intermec Settings to configure parameters for Intermec
applications on the computer, as well as device-specific parameters like
volume. You can configure parameters for important functions like
data collection and communications.