manualshive.com logo in svg

Intermec CS40 Vehicle Power Adapter, User Manual

Share
Download
Intermec CS40 Vehicle Power Adapter User Manual Download Page 72

Chapter 7 — Configuring the Computer

60

CS40 Mobile Computer User’s Manual

3

From the Camera, Power, or Scanning submenu, check or clear the 

Display

 check box for the settings you want available to the end 

user.

4

Tap 

OK

 to save your selection.

Restoring Default Settings

You can restore default settings for an individual menu or for all 
Intermec Settings parameters.

To restore default settings for an individual menu:

1

Navigate to the menu you want to restore to defaults.

2

Tap 

Menu > Restore Menu Defaults

.

3

When prompted, tap 

Yes

 to restore the menu default settings.

4

If prompted to refresh the computer, tap 

Yes

.

To restore defaults settings for all parameters:

1

Tap 

Menu > Restore All Defaults

.

2

Tap 

Yes

.

3

After several minutes, all of the default settings are restored.

How to Hide Menu Items in Intermec Settings

If you do not want menu items available to other users, you can hide 
them. Hidden items are not saved when you back up your settings in 
the SmartSystems Foundation Console.

To hide menu items:

1

Tap and hold the item, and then choose 

Hide Menu Item

 from the 

popup list. 

2

When asked if you want to hide the menu, tap 

Yes

.

To restore hidden items in a single menu:

•

Tap and hold the menu bar where the item was hidden, and then 
choose 

Restore Item Default

 from the popup list.

To restore all hidden items in all menus:

•

Tap 

Menu > Unhide All Items

.

Summary of Contents for CS40 Vehicle Power Adapter

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands