Intermec CS40 Vehicle Power Adapter, User Manual

Page: 17 / 152

Chapter 1 — Using the Computer
CS40 Mobile Computer User’s Manual 5
Turning On the CS40 for the First Time
The first time you turn on your CS40:
•
you are prompted to select the language you want to use. Your
language selection applies to text used in the Windows Mobile user
interface and Microsoft applications.
• you need to align the touch screen.
To turn on the CS40 for the first time:
1
Insert the battery into the CS40.
The CS40 turns on, and you are prompted to select a language.
2 Use the
u
,
d
, and
e
keys to select a language and navigate
through the screens.
The language you selected loads on the CS40.
3 Fully charge the battery. For help, see “About the Battery” on
page 6 .
4
When you are prompted, tap the screen to set up your CS40.
CS40 Vehicle Holder
Use the vehicle holder to hold your CS40
while you are using it in a vehicle.
CS40 Holster
Use the holster accessories to carry your
CS40 when you are not using it.
CS40 Purse Use the purse accessory to carry your
CS40 when you are not using it.
CS40 Screen Protector This accessory provides additional
protection for the screen.
CS40 Tethered Stylus
Replacement Kit You can order and install a replacement
stylus.
CS40 USB Cover Replacement Kit You can order and install a replacement
cover for the USB port.
Accessory Description
Note: You cannot change the language once it is loaded on your CS40.
The only way to modify the language selection is to reload or update
the firmware. For help, see
“Updating the System Software” on page
89
.