Intermec 68788, User Manual

Page: 33 / 132

code39 code39
Connecting the Ethernet Adapter
2-7
2
IP Address
During the Axis Installation Wizard, you can choose the method the
Ethernet adapter employs for obtaining an IP address. Dynamic host configuration
protocol (DHCP), address resolution protocol (ARP), reverse address resolution
protocol (RARP), and bootstrap protocol (BOOTP) are supported. You can also select
to set the IP address manually. Refer to “Setting Up for TCP/IP” later in this chapter for
more information about setting the IP address.
Test Label
Do not print a test label from AXIS NetPilot. To print a test label, see
“Printing a Test Label” later in this chapter.
Unless you want to connect or create additional printing queues, the installation for the
NetWare environment is now completed.
After AXIS NetPilot finishes configuring the Ethernet adapter, wait about one minute
before trying to communicate with the Ethernet adapter.
Note: If printing is not satisfactory, you can change the parameters to your
requirements.
For information on advanced functions, please refer to the AXIS Network Print Server
Technical Reference. You may download this or other technical information over the
Internet by accessing the Axis web site at www.axis.com.
Setting Up for TCP/IP
Before you begin setting up your Ethernet adapter for TCP/IP, you need the following
information and network privileges:
Information or Privilege Description
System privileges You need root privileges on your UNIX system or administrator
privileges on a Windows NT server.
Ethernet address You need to know the Ethernet address of your Ethernet adapter
to perform the installation. The Ethernet address is based on the
serial number of your adapter. This means that an Ethernet
adapter with a serial number of 00408C100086 will have a
corresponding Ethernet address of 00 40 8C 10 00 86. The serial
number of your external adapter is located on the underside of the
adapter. The serial number for the internal adapter is located on
the back of your printer by the 10BaseT connector.
IP address Unless you are downloading the IP address using DHCP, you
must acquire an unused IP address from your network
administrator.
Note: Do not use the example IP address when installing your Ethernet adapter.
Always consult your network administrator before assigning an IP address.