Intermec 68788, User Manual, Page: 23 / 132

code39 code39
Introducing the Ethernet Adapter
1-7
1
Features and Benefits (continued)
Monitoring
The provided AXIS NetPilot software and the Ethernet adapter’s internal Web pages
allow you to continuously monitor printer status.
The AXIS Print Monitor for Windows 95, 98, and NT can be configured to display
pop-up messages that show the status of peer-to-peer print jobs.
The Ethernet adapter additionally supports simple network management protocol
(SNMP) for remote monitoring.
Firmware Upgrades
You can upgrade the Ethernet adapter’s firmware over the network. This allows you to
quickly update and enhance the operational features of your Ethernet adapter when
new adapter firmware becomes available. All firmware updates are free of charge.
Using the Test Button
The Test button is located on the front right hand side of the external Ethernet adapter
and on the printer’s back panel near the Ethernet cable connector for the internal
Ethernet adapter. With the Test button, you can
•
print a print quality label that checks the connection to the printer if you have
firmware version 5.59 or higher. If your Ethernet adapter has a firmware version
lower than 5.59, you can use the Test button to print a print quality label by putting
the printer in Data Line Print mode. Data Line Print mode is available on the
following printer models: 3240, 3400, 3440, 3600, 4400, 4420, and 4440.
•
print the parameter list showing some of the Ethernet adapter’s settings. This
functionality works only with firmware version 5.59 or higher.
•
reset the Ethernet adapter’s parameters to the original factory default settings.
The functionality of the Test button is determined by the power status of the Ethernet
adapter and the number of times you press the button.
To print a print quality label with the Test button
•
If you have firmware version 5.59 or higher, press the Test button once to print a
print quality label.