Intermec 68788 User Manual Download Page 124

Page: 124 / 132

Intermec Ethernet Adapter User’s Manual

B-4

Supported Protocols

NetWare

IPX, SAP, RIP, SPX, SNMP, NCP (extended with
NDS), NLSP, DIAG.

Windows and OS/2

NetBIOS/NetBEUI or TCP/IP, WINS/NBNS.

LANtastic

NetBIOS/NetBEUI.

TCP/IP

LPD, FTP, Telnet, Reverse Telnet, PROS, BOOTP,
ARP, RARP, DHCP, ICMP, IP, TCP, UDP, HTTP,
SNMP, TFTP, SLP.

Apple EtherTalk

AARP, ATP, DDP, NBP, PAP, RTMP, ZIP.

Network Management

SNMP-MIB II compliant (over UDP/IP and IPX), private enterprise MIB included.
LAN Network Manager for OS/2. Print server status in NWAdmin/PCONSOLE.

Logical Connection

Running simultaneously any combination of the supported protocols. Use of
IEEE802.2, IEEE802.3, SNAP, and Ethernet II frame types simultaneously.

Security

UNIX

Root password. User access list and printer access.

NetWare

Encrypted passwords.

Physical Specifications

Hardware

•

32 bit RISC Controller, 1MB Flash memory. 256K RAM.

Attachments

•

10BaseT (Twisted Pair) Ethernet.

Logical Printers

The logical printer ports can be programmed to perform auto ASCII to PostScript
conversion, string before and after job, string substitution, alternative output and
character set conversion.

Summary of Contents for 68788





































































































































Search results

Summary of Contents for 68788

Reviews:

Related manuals for 68788

Brands by name

Popular brands

Intermec 68788, User Manual

Search results

Summary of Contents for 68788

Reviews:

Related manuals for 68788

Brands by name

Popular brands