Chapter 5: Motion setup
42
UltraView IP PTZ 36X Camera User Manual
Preset tour settings
Preset tours (called “Patrols” in the menu) move the dome camera to different
steps and have it stay there for a set dwell time before moving on to the next
point. The steps are defined by presets. See Figure 19 below.
Figure 19: Preset tour (Patrol) parameters
Each preset tour (patrol) consists of a sequence of steps. A step consists of a
step number (Patrol sequence), a preset ID, a dwell time, and a speed. A preset
tour can include up to 32 presets.
Note:
At least two presets must already exist before a preset tour can be set up.
The step number is the order the camera will follow while cycling through the
preset tour.
The dwell time is the length of time for which a camera stays at a step before
moving to the next one. It can range between 0 and 30 seconds with 2 seconds
as default.
The speed is the rate at which the camera will move from one step to the next. It
can range between levels 1 and 40 with 30 as default. See Table 8 for the list of
speed level values.
