![Interlogix UltraView IP PTZ 36X User Manual Download Page 31](http://html1.mh-extra.com/html/interlogix/ultraview-ip-ptz-36x/ultraview-ip-ptz-36x_user-manual_2077198031.webp)
Chapter 4: Camera setup
UltraView IP PTZ 36X Camera User Manual
27
Parameter
Description
Max bit rate
Specifiythe maximum allowed bit rate. A high image resolution requires that
a high bit rate must also be selected.
Select one of the options: 32 bps, 48, 64, 80, 96, 128, 160, 192, 224, 256,
320, 384, 448, 512, 640, 768, 896, 1024, 1536, 1792, 2048, or Customize
(enter a value manually). Default is 2048.
Frame rate
Specify the frame rate for the selected resolution.
Select one of the options: 1/16, 1/8, 1/4, 1/2, 1, 2, 4, 6, 8, 12, 16, 22, or full
frame (25). Default is full frame (25).
I frame interval
A video compression method. It is strongly recommended not to change the
default value displayed, 25.
RTSP port
Specify the port used to stream video over an RSTPport.
Naming the camera
This is the camera name that is displayed on screen.
To name the camera:
1. In the Remote Configuration folder, click the
Video Setting
subfolder to open
its screen.
2. Enter the camera name in the
Channel name
edit box. The camera name
can have up to 12 alphanumeric characters.
3. Click
Save
to save changes.
Defining a recording schedule
You can define a recording schedule for the camera in the Schedule Recordings
screen under Camera Parameters. The recording is saved on the SDHC card in
the camera. Although all recordings are saved on the DVR, the camera’s SDHC
card provides a backup in case of network failure, for example. See Figure 12 on
page 28.