TruVision IP PTZ Camera Configuration Manual
47
Upload to FTP/Memory
Card/NAS
Capture the image when an alarm is triggered and upload the
picture to NAS or FTP server.
Trigger Recording
Triggers the recording to start in the camera.
Trigger Alarm Output
Trigger external alarm outputs when an event occurs. Select
one of the options: Select Trigger Alarm Output, A->1, or A-
>2.
Note:
This option is only supported by cameras that support
alarm output.
7. Click
Save
to save changes.
Intrusion detection
You can set up an area in the surveillance scene to detect when intrusion occurs. If
someone or a vehicle enters the area, a set of alarm actions can be triggered.
To set up intrusion detection:
1. From the menu toolbar, click
Camera Configuration > Alarm/Event Setup>
Intrusion Detection
.
2. Select
Enable
to enable the function.
3. Select
Draw Area
and then draw a rectangle on the image as the defense region.
When you draw the rectangle, all lines should connect end-to-end to each other. Up
to four areas are supported. Click Clear to clear the areas you have drawn. The
defense region parameters can be set up separately.
Note:
The area can only be quadrilateral.
4. Choose the region to be configured.
Threshold:
This is the time threshold that the object remains in the region. If you
set the value as 0, the alarm is triggered immediately after the object enters the
region. The range is between 0 and 10.
