22
TruVision IP PTZ Camera Configuration Manual
ROI Level
: Choose the image quality enhancing level. Default is 6.
Region Name
: Enter the desired region name.
5. Using the mouse, draw an area on the image.
6. Enable
Face Tracking
or
Target Tracking
(4), if required. This is an intelligent
analysis feature that facilitates auto-tracking. Select the ROI level. Default is 6.
7. Repeat steps 2 to 6 to set other regions. Up to eight regions can be set.
8. Click
Save
to save changes.
PTZ parameters
The following sections explain how to configure the different PTZ parameters.
PTZ home position
The initial position is the PTZ home coordinates. It can be the factory default position or
you can customize the initial position to your own requirements.
To set the initial position:
1. From the menu toolbar, click
Camera Configuration
>
PTZ
>
Initial Position
.
2. Click the PTZ control buttons to find a position as the initial position of the camera.
You can also call a defined preset and set it as the initial position.
3. Click
Set
to save the position.
To call and delete the initial position:
Click
Call
to call the initial position. Click
Clear
to delete the initial position and
restore the factory default initial position.
Basic PTZ parameters
You can configure the PTZ parameters, such as proportional pan, preset freezing,
preset speed, keyboard control speed, auto scan speed, and PTZ OSD.
To define basic PTZ parameters:
1. From the menu toolbar, click
Camera Configuration
>
PTZ
>
Basic Settings
.
