18
TruVision IP PTZ Camera Configuration Manual
Sender’s Address:
The email address of the sender.
SMTP Server:
The SMTP Server IP address or host name.
SMTP Port:
The SMTP port. The default is 25.
Enable SSL:
Select the check box to enable SSL if it is required by the SMTP
server.
Attached Snapshot
: Select the
Attached Snapshot
check box
if you want to send
emails with attached alarm snapshots.
I
nterval:
This is the time between two actions of sending attached images.
Authentication
: If your email server requires authentication, select this check box
to use authentication to log in to this server. Enter the login user name and
password.
Receiver:
The name of the user to be notified.
Receiver’s Address:
The email address of user to be notified.
3. Click
Save
to save changes.
To set up the NAT parameters:
1. Click
Camera Configuration
>
Network
>
NAT
.
2. Select the check box to enable the NAT function.
3. Select
Port Mapping Mode
to be Auto or Manual. When you choose Manual mode,
you can set the external port as you want.
4. Click
Save
to save changes.
To set up the integration protocol parameters:
1. Click
Camera Configuration
>
Network
>
Integration Protocol
.
2. Select the
Enable STD-CGI
check box and then select the authentication from the
dropdown list. Then you can access to the camera through the third party platform.
3. Select the
Enable ONVIF
check box to enable the function.
4. Click
Add
to add a new ONVIF user. Set the user name and password, and confirm
the password. You can set the user as media user, operator, and administrator.
5. Click
Modify
to modify the information of the added ONVIF user.
6. Click
Delete
to delete the selected ONVIF user.
7. Click
Save
to save changes.
Recording parameters
You can adjust the video and audio recording parameters to obtain the picture quality
and file size best suited to your needs. The figures below list the video, audio, ROI, and
video analytics information display recording options you can configure for the camera.