11BChapter 12: Recording
TruVision NVR 70 User Manual
73
1.
Camera
. Select a camera.
2.
Schedule time
. Represents the 24-hour cycle during which a schedule is selected.
3.
Schedule map
. There are seven days to select: Monday (Mon), Tuesday (Tue), Wednesday (Wed),
Thursday, (Thu), Friday (Fri), Saturday (Sat), and Sunday (Sun).
4.
Edit button.
Click to modify schedules and to copy schedules to other days of the week.
5.
Advanced settings.
Click to modify the following parameters:
Pre Event
: This is the time the camera starts recording before the event. Select the time in
seconds from the list to start pre-recording before the event. Default is 5 seconds.
The maximum pre-recording times available depend on the constant bit rate. See “Maximum
storage times” in the appendix.
Post Event
: This is the time the camera continues to record after the event. Select the time in
seconds from the list to stop post-recording after the event. Default is 5 seconds.
Record Audio
: Enable to record sound with the images. Default is enable.
Auto Delete (day)
: Select the number of days after which recorded video from the specified
camera is permanently deleted from the HDD. A “day” is defined as the 24-hour period from
when the auto delete mode (ADM) was set.
The maximum number of days that can be set is 365. However, the actual number of days
permitted depends on the HDD capacity. If the value is set to ‘0’, the option is disabled. Default is
disable.
Redundant record/capture
: When enabled, the recorder can redundantly record a copy of the
videos onto multiple HDDs as a safeguard against disk failure.
6.
Recording type
. There are five types of recording to select, which are color-coded:
TL-Hi
(Dark green): High quality time lapse. It records high quality video.
TL-Lo
(Bright green): Low quality time lapse. It records low quality video. This could be used, for
example, for night recordings when few events or alarms are expected. Saving the video in low
quality helps save resources on the HDD.
Event
(Yellow): It records only events, such as motion detection and POS/ATM text insertion.
Alarm
(Red): It records only alarms.
None
(White): No recording during this period.
7.
Time line
. There is a 24-hour time line for each day. Up to eight recording periods can be scheduled
during the 24-hour period.
8.
Copy button.
Click to copy schedules between cameras.
Define a recording schedule
To set up a daily recording schedule:
1. From the menu toolbar, click
Configuration
>
Remote
Configuration
>
Recording
>
Recording Schedule
.
2. Select a camera.
3. Check the
Enable Recording
box.
4. Click
Edit
. The following window is displayed: