![background image](http://html1.mh-extra.com/html/interlogix/truvision-70/truvision-70_user-manual_2076824057.webp)
9BChapter 10: Camera setup
TruVision NVR 70 User Manual
55
•
Non-transparent & Flashing
•
Non-transparent & Not flashing
6. There are two red text boxes in the camera view window; one for the camera name and the
other for the date/time. Using the mouse, click and drag a text box to the desired display
position.
7. Click
Save
to save the settings.
Motion detection
The motion detection menu allows you to enable or disable motion detection for each camera,
as well as create motion grids, set the sensitivity of the motion detection and link motion
detection to a specific action. However, the motion alarm is only triggered if it occurs during a
programmed time schedule.
To set up motion detection:
1. From the menu toolbar, click
Configuration
>
Remote Configuration
>
Camera Setup
>
Motion Detection
.
2. Select the camera to detect motion. Each camera must be set up individually.
3. Check
Enable Motion Detection
. If this is not enabled, motion will not be recorded.
4. Check
Enable Dynamic Analysis for Motion
. Use this feature to display and store motion
metadata. This metadata can also be used in TruVision Navigator and is also used for
motion search.
5. Select the areas on-screen to be sensitive to motion. By default the whole screen is
sensitive to motion detection.
Click the
Start Erase
button and drag the mouse cursor across the window to deselect
areas sensitive to motion detection. Click the
Start Draw
button to select areas. Click
Clear
to clear the screen.