14BChapter 15: Storage management
98
TruVision NVR 70 User Manual
2. Click the
Enable RAID
checkbox.
The system will automatically reboot.
Caution
: The system can take up to 10 minutes to fully restart. Do not manually disconnect
power during restart.
3. Once the system has restarted, go to the
Raid Settings
menu.
4. Click the
Create
button to open the “Create Array” window.
5. Enter a name for the array, and select the RAID level and the drives to be included.
6. Click
OK
to start the process. When the process is complete, data on the RAID group is
displayed.
Note:
You can create a RAID array of RAID 0, RAID 1, RAID 5, and RAID 10.
•
If you choose RAID 0, at least 2 HDDs must be installed.
•
If you choose RAID 1, 2 HDDs need to be configured for RAID 1.
•
If you choose RAID 5, at least 3 HDDs must be installed.
•
If you choose RAID 10, 4/6/8 HDDs need to be configured for RAID 10.
To rebuild a RAID array:
1. From the menu toolbar, click
Configuration
>
Remote Configuration
>
Storage
Management
>
Raid Settings
.
2. Ensure the
Enable RAID
checkbox is checked.
3. Click the
Rebuild
button to open the “Rebuild Array” window.
4. Select the HDD to include.
5. Click
OK
to start the process. When the process is complete, data on the RAID group is
displayed.