LCD Keypad
14
2SHQ
3
4. To view the events from the oldest to the newest, press [
x
]. The display
contains the following information.
Event
User or Zone ID
Date
Indicates partition
(Month/Day)
ß
Time shown in
and
U
indicates an
24 hour format
event not reported
This screen shows an opening of Partition 3 on September 25
th
at 5:27 p.m. by
user 75. The
U
shows that this event is not programmed to be reported to the
central monitoring station. Refer to Appendix A on page 21 for a list of possible log
messages.
ADJUSTING THE VIEW / BRIGHTNESS OF THE LCD
1. Enter
[
U
] [9] [1]. The LCD will prompt for a code.
2. Enter
[master code]. The LCD will prompt you to raise or lower the view.
3. Use
[
x
] [
y
] to raise or lower the viewing angle of the text.
4. Press
[
U
] to advance to the Brightness option. The LCD will prompt you to
brighten or dim the LCD lighting. Use [
x
] [
y
] to adjust to desired brightness.
5. Press
[#] to exit.
SETTING THE SYSTEM CLOCK
1. Enter
[
U
] [9] [7]. The LCD Screen will prompt for a code.
2. Enter
[master code]. The time and date will be displayed with the current
hour flashing.
3. Use
[
x
] [
y
] to select the proper hour.
4. Press
[
U
] to move to the minutes, day of week, date, month, and year.
5. Repeat Steps 3 and 4 until the entire time and date are set.
Summary of Contents for NX-1248E
Page 1: ......