LCD Keypad
17
T
To disarm all of these areas, press [
x
].
T
To arm all of these areas, press [
y
].
T
To toggle a single area between the armed and disarmed conditions, press [
U
]
[Area number]. For example: If Area 4 is armed, [
U
] [4] will disarm Area 4. If
Area 4 is disarmed, [
U
] [4] will arm it.
T
Press [AWAY], [STAY], or [NIGHT] once to arm all authorized partitions into
the corresponding mode.
T
To control the individual areas, refer to the following section.
OPERATING INDIVIDUAL AREAS IN THE MULTI-PARTITION MODE
Enter a code that is a valid arm/disarm code for the area you wish to operate. The
following display will appear on the LCD screen.
Only the areas authorized by this code will
appear.
To toggle between the armed and disarmed states of an individual area, press [
U
]
[Area number].
To operate an individual area, enter the number of the partition you wish to
operate. The LCD keypad will now operate as a single area keypad. All keys and
functions entered will affect this individual partition only. The lights and display
represent the status of that partition only. The word "System" will be replaced with
the word "Area #". The following is an example of this feature. To exit this screen,
press [#].
Area 5 is selected and Area 5 is ready to
arm. To exit the individual partition mode,
enter [#] [#].
SILENCING ALARMS IN THE MULTI-PARTITION MODE
If the keypad is sounding an alarm or the siren is running, it can be silenced by
entering a code with the authority for the area(s) that are in alarm. NOTE: The
[BYPASS], [AWAY], [STAY] and [NIGHT] keys will only work if an individual
partition is selected.
³'LVDUP
$UP
$UHD5HDG\
7\SHFRGHWRDUP
Summary of Contents for NX-1248E
Page 1: ......