v1.1
REV. 05/2015
TEC 1
• Note that automatic gate and door systems must be installed exclusively by qualified technical
personnel in full compliance with statutory legislation.
• Before starting the installation procedure check that the values given in the "Technical
Specifications” chapter are compatible with the application.
• This product has been designed to control door openers, gate openers and similar mechanisms.
Any other use of the product will be considered improper.
This is a dual channel transmitter that is activated only after having entered a suitable
combination.
The units are designed for installation in indoor or outdoor locations. That ensures the utmost
security because the transmitted code is changed at each transmission session.
The estimated transmission range is 200 m in open space and 35 m indoors.
The units are designed to ensure battery life equivalent to an estimated 2 years of operation
considering 10 transmissions per day.
Audible signal
Status
1 short beep
Keypad tone
1 long beep
Auto power-off
3 long beeps
Modification of combination confirmed
5 short beeps
Error during combination input or combination edit operation
10 rapid beeps
Battery low warning signal New batteries required
Before physically installing the unit it is good practice to perform a practical test to assess their
functionality and effective range.
Consider that range may be up to 25 or 30% less when battery power is low.
Apart from the distance from the receiver, the units should not be positioned in the vicinity or in
contact with metal structures, which could otherwise exert a signal shielding effect. Thanks to
the enclosure protection rating of IP 54, the digital selectors can be installed outdoors if required.
INSTALLATION
WARNINGS
POSITIONING
USER MANUAL/INSTALLER
EN
