![background image](http://html.mh-extra.com/html/interlogix/ns3562-8p-2s/ns3562-8p-2s_user-manual_2077360060.webp)
Chapter 4: Web configuration
58
NS3562-8P-2S User Manual
Protected Ports
Configures protected ports settings
Port configuration
Ports can be configured on the Port Configuration page.
The page includes the following fields:
Object
Description
Port Select
Select port number from this drop-down menu.
Enabled
Indicates the port state operation. Selections include:
Enabled
- Start up the port manually.
Disabled
– Shut down the port manually.
Speed
Select any available link speed for the given switch port. Draw the
menu bar to select the mode.
Auto
- Set up Auto negotiation.
Auto-10M
- Set up 10M Auto negotiation.
Auto-100M
- Set up 100M Auto negotiation.
Auto-1000M
- Set up 1000M Auto negotiation.
Auto-10/100M
- Set up 10/100M Auto negotiation.
10M
- Set up 10M Force mode.
100M
- Set up 100M Force mode.
1000M
- Set up 1000M Force mode.
Duplex
Select any available link duplex for the given switch port. Draw the
menu bar to select the mode.
Auto
- Setup Auto negotiation.
Full
- Force sets Full-Duplex mode.
Half
- Force sets Half-Duplex mode.
Flow Control
When
Auto Speed
is selected on a port, this section indicates the
flow control capability that is advertised to the link partner. When a
fixed-speed setting is selected, that is what is used. The Current Rx
column indicates if pause frames on the port are obeyed, and the
Current Tx column indicates whether pause frames on the port are
transmitted. The Rx and Tx settings are determined by the result of
the last Auto-Negotiation.
Check the configured column to use flow control. This setting is
related to the setting for Configured Link Speed.
Buttons
• Click
Apply
to apply changes.