Interlogix NS3562-8P-2S, User Manual, Page: 217 / 245

Chapter 4: Web configuration
NS3562-8P-2S User Manual 215
Click the Add New Rule button to start setting the PoE schedule function. Click Apply
after creating a schedule for the selected profile. Then, go to the PoE Port
Configuration page and select
Schedule from the PoE Mode drop-down menu, and the
profile number from the Schedule drop-down menu, for each port to which you want to
apply the schedule profile.
The page includes the following fields:
Object Description
Profile Set the schedule profile mode. Possible profiles are:
Profile1
Profile2
Profile3
Profile4
Week Day Set the weekday for enabling the PoE function.
Start Hour Set the hour for enabling the PoE function.
Start Min Set the minute for enabling the PoE function.
End Hour Set the hour for disabling the PoE function.
End Min Set the minute for disabling the PoE function.
Reboot Enable Enables or disables a PoE port reboot according to the PoE reboot schedule.
Note that if you want the PoE schedule and PoE reboot schedule to work at
the same time, use this function and do not use the Reboot Only function.
This function permits the administrator to reboot the PoE device at the
indicated time as required.
Reboot Only Permits a reboot of the PoE function according to the PoE reboot schedule.
Note that if the administrator enables this function, the PoE schedule will not
set the time to a profile. This function only applies to PoE port reset at the
indicated time.
Reboot Hour Sets the hour for PoE reboots. This function is only for the PoE reboot
schedule.
Reboot Min Sets what the minute for PoE reboots. This function is only for the PoE reboot
schedule.
Buttons
• Click Add New Rule to set the PoE schedule function.
• Click Apply to apply changes.
• Click Delete to delete the entry.
PoE alive check configuration
The IFS PoE managed switch can be configured to monitor connected PD status in
real-time via ping action. Once the PD stops working and does not respond, the PoE
switch restarts PoE port power, and restores the PD to a working state. This increases
reliability and reduces administrator management problems.