![background image](http://html.mh-extra.com/html/interlogix/ns3562-8p-2s/ns3562-8p-2s_user-manual_2077360191.webp)
Chapter 4: Web configuration
NS3562-8P-2S User Manual
189
Object
Description
the value of
Tx Delay
seconds.
Tx Delay
cannot be larger than 1/4 of the
Tx
Interval
value. Valid values are restricted to 1 - 8192 seconds.
This attribute must comply with the rule:
(4 * Delay Interval) ≤Transmission Interval
LLDP-MED Fast Start
Repeat Count
Configures the amount of LLDP MED Fast Start LLDPDUs to transmit during
the activation process of the LLDP-MED Fast Start mechanism.
Range: 1-10 packets;
Default: 3 packets
The MED Fast Start Count parameter is part of the timer which ensures that
the LLDP-MED Fast Start mechanism is active for the port. LLDP-MED Fast
Start is critical to the timely startup of LLDP, and therefore integral to the
rapid availability of Emergency Call Service.
Buttons
• Click
Apply
to apply changes.
LLDP port configuration
Use the LLDP Port Configuration to specify the message attributes for individual
interfaces, including if messages are to be transmitted, received, or both transmitted
and received.
The page includes the following fields:
Object
Description
Port Select
Select a port from these drop-down menus.
State
Enables LLDP messages transmit and receive modes for LLDP Protocol
Data Units. Options:
Tx only
Rx only
TxRx