![background image](http://html.mh-extra.com/html/interlogix/ns3562-8p-2s/ns3562-8p-2s_user-manual_2077360111.webp)
Chapter 4: Web configuration
NS3562-8P-2S User Manual
109
The page includes the following fields:
Object
Description
Priority
Controls the bridge priority. Lower numerical values have higher
priority. The bridge priority plus the MSTI instance number,
concatenated with the 6-byte MAC address of the switch, forms a
bridge identifier.
For MSTP operation, this is the priority of the CIST. Otherwise, this is
the priority of the STP/RSTP bridge.
Max Hops
This defines the initial value of remaining Hops for MSTI information
generated at the boundary of an MSTI region. It defines how many
bridges a root bridge can distribute its BPDU information. Valid
values are in the range of 6 to 40 hops.
Forward Delay
The delay used by STP Bridges to transition Root and Designated
Ports to Forwarding (used in STP compatible mode). Valid values are
in the range 4 to 30 seconds
Default: 15
Minimum: The higher of 4 or [(Max. Message Age / 2) + 1]
Maximum: 30
Max Age
The maximum age of the information transmitted by the Bridge when
it is the Root Bridge. Valid values are in the range 6 to 40 seconds.
Default: 20
Minimum: The higher of 6 or [2 x (Hello Time + 1)].
Maximum: The lower of 40 or [2 x (Forward Delay -1)]
Tx Hold Count
The number of BPDUs a bridge port can send per second.
When exceeded, transmission of the next BPDU is delayed. Valid
values are in the range 1 to 10 BPDU's per second.
Hello Time
The time that controls the switch to send out the BPDU packet to
check STP current status.
Enter a value between 1 through 10.
Buttons
• Click
Apply
to apply changes.