-22-
Object
Description
Band
Supports 802.11a, 802.11n, 802.11ac and mixed. Please choose its band
according to your clients.
Mode
Supports AP, Client, WDS and AP+WDS mode.
SSID
Service Set Identifier identifies your wireless network.
Channel Width
Select 80MHz if you use 802.11ac; select 40MHz if you use 802.11n;
otherwise, 20MHz for the 802.11a mode.
Control Sideband
It is only valid when you choose channel width 40MHz.
Channel Number
Indicates the channel setting for the AP.
Step 4: Wireless 5GHz Security Settings
Secure your wireless network by turning on the WPA or WEP security feature on the router. For this section you
can set
WEP
and
WPA-PSK
security mode.
Figure 5-8
Wizard – Wireless 5GHz Security Setup
Encryption: WEP
The following picture shows how to set the WEP security.
Figure 5-9
5GHz Wireless Security Setup – WEP Setting
The page includes the following fields:
Object
Description
Key length
WEP supports 64-bit or 128-bit security key.
Key Format
User can enter key in ASCII or Hex format.
Key Setting
Enter the key whose format is limited by the Key format, ASCII or Hex.
Summary of Contents for IFS WMC303-1W-1T-1200
